Filter
Top Products
EN 47
AM 10 : 24DEC 25. 97
MERRY CHR ISTMAS
TAPE END
–
05
MWB
DISP.
REC SP
SEPIA
LENS COVER
FADE
18MIN
T30
1MIN
1/2S
INDEX
PAUSE
8
9
0
1 *
2 * 6 * 7
% *
&
^
*
(
)
q
e
!
#
$
@
w
43 5
LCD monitor/Viewfinder Indications
% *Battery Pack Remaining Power Indicator
Changes as follows according to the battery
pack’s remaining power level:
“ ”.
When the power is
almost gone, the indicator blinks, then the unit
shuts off. Replace the battery pack with a fully
charged one.
(Note: The symbol containing 3 darkened
squares —
— does not necessarily mean
that the battery pack is fully charged.)
^ Focus Indicator ................................... ੬ pg. 22
& Exposure Level Indicator ..................... ੬ pg. 21
* White Balance Mode Indicator ........... ੬ pg. 27
( Menu Setting Change Indicator ........... ੬ pg. 28
) Index Code Marking ........................... ੬ pg. 41
q Clock Warning
Displayed for about 5 seconds if the clock
(lithium) battery is not in place or is exhausted
when power is turned on. Also displayed for
about 5 seconds when clock battery becomes
exhausted while using the camcorder.
For inserting or replacing the clock
battery ................................................ ੬ pg. 10
w Condensation Warning
When this indication appears, all functions are
disabled. Turn the unit off (without removing the
power source) for a few hours, and when you
turn it on again the indicator should disappear.
e Tape End Display ................................ ੬ pg. 15
Appears when the end of the tape is reached
during playback, recording or fast-forward.
INDEX
LCD monitor/Viewfinder
1 * Cassette Warning/Remaining
Tape Time ......................................... ੬ pg. 15
When no cassette is inserted or when Erase
Protection tab is not in the position that allows
recording, the Cassette ( )Warning blinks.
Otherwise, the Remaining Tape Time is
displayed.
2 * Recording Mode (SP/EP) Indicator .... ੬ pg. 12
3, 9 PROGRAM AE Indicator................ ੬ pg. 20
Displayed at 3 for approx. 1 second when the
PROGRAM AE select dial is switched from one
position to another. Then only the indicator
remains at 9.
4 Program Manager Function
Indication ........................................... ੬ pg. 24
Appears when the PROGRAM AE select dial is
set to any position other than AUTO LOCK.
5 Lens Cover Warning ........................... ੬ pg. 15
6 * Tape Length Display ......................... ੬ pg. 12
7 Zoom Level Indicator.......................... ੬ pg. 18
8 Recording Indicator ............................ ੬ pg. 15
0 Fade–Standby Indicator ...................... ੬ pg. 24
! Interval Time/Recording
Time Indicator..................................... ੬ pg. 30
@ Record–Standby Mode Indicator......... ੬ pg. 15
# Instant Title Display ............................ ੬ pg. 25
$ Date/Time Character Display .............. ੬ pg. 26
*
* : During recording, pressing DISPLAY lets you remove indications marked with * from the screen.