12
BASIC FEATURES
Picture Stabilizer
To compensate for unstable images caused by
camera-shake, particularly at high magnification.
1) Press P. STABILIZER
4. 0 appears.
2) To switch off the Picture Stabilizer, press
P. STABILIZER
4. 0 disappears.
•Accurate stabilization may not be possible in
certain conditions including excessive hand
shake.
•
0 appears blinking if the Stabilizer cannot be
used.
5Sec. Rec (5-sec. Recording)
To record a scene for 5 seconds, providing quick
scene transitions like those seen in TV
programs.
1) Make sure the recording mode is set to “SP”.
2) During Record–Standby, press 5SEC. REC
2.
5S ! appears and 5Sec. Rec is reserved.
3) Press the Recording Start/Stop Button.
Recording starts, and after 5-second recording
is finished, the camcorder reenters the Record–
Standby mode automatically.
4) To cancel the 5Sec. Rec. function, press 5SEC.
REC
2 again so that 5S ! disappears.
•Fade/Wipe (
੬ pg. 22) cannot be activated by
pressing 5SEC. REC
2.