Filter
Top Products
EN43
PAUSE
PLAY
EFFECT
ON/OFF
EFFECT
P
4
L
O
A
F
1
2
3
4
5
Y
F
BACK
C
M
S
S
V
L
O
E
T
I
E
A
N
P
R
D
F
S
O
I
O
E
F
S
T
A
B
O
E
I
O
E
C
C
N
E
T
E
C
F
H
I
O
LM
SLOW
Rewind Button
Remote sensor
SLOW
Forward Button
FEATURE:
Slow-Motion Playback
(GR-DVL507 only)
PURPOSE:
To allow slow-speed search in either direction during
playback.
OPERATION:
1) To change from normal to Slow-Motion Playback, press
PAUSE (6) to engage Still Playback then press SLOW
(
9
or
0
) more than approx. 2 seconds. After approx. 1
minute in Slow Rewind or approx. 2 minutes in Slow
Forward, normal playback resumes.
ⅢTo stop Slow-Motion Playback, press PLAY (
4
).
NOTES:
●
During Slow-Motion Playback, due to digital image
processing, the picture may take on a mosaic effect.
●
After SLOW
(
9
or
0
)
is pressed and held, the still
image may be displayed for a few seconds, followed by
a blue screen for a few seconds. This is not a malfunc-
tion.
●
There may be a small margin between the slow-motion
playback start point you chose and the actual start
point for Slow-Motion Playback.
●
During Slow-Motion Playback, there will be distur-
bances in video and the picture may seem unstable,
especially with steady images. This is not a malfunction.
●
During Slow-Motion Playback, press PAUSE
(6)
to
pause playback.
FEATURE:
Frame-By-Frame Playback
(GR-DVL507 only)
PURPOSE:
To allow frame-by-frame search during playback.
OPERATION:
1) To change from normal to Frame-By-Frame Playback,
press PAUSE (6) to engage Still Playback then press
SLOW (
0
) repeatedly for forward or SLOW (
9
)
repeatedly for reverse. Each time it is pressed, the
frame is played back.
FEATURE:
Playback Special Effects (GR-DVL507 only)
PURPOSE:
To allow you to add creative effects to the playback image.
OPERATION:
1) To start playback, press PLAY (
4
).
2) Point the remote control at the camcorder's remote sensor and press EFFECT. The PLAYBACK EFFECT Select
Menu appears.
3) Move the highlight bar to the desired effect by pressing EFFECT. The selected function is activated and after
2 seconds the menu disappears.
ⅢTo deactivate the selected effect, press EFFECT ON/OFF on the remote control. Pressing it again re-activates the
selected effect.
ⅢTo change the selected effect, repeat from step 2 above.
NOTES:
●
When some Playback Special Effects are used, the Multi-Analyzer 4 and Multi-Analyzer 9 Snapshot modes
(
੬
pg. 17) are not available.
●
The effects that can be used during playback are Classic Film, Monotone, Sepia, Strobe and Video Echo. The
effects work the same in playback as they did in recording. Refer to page 28 for more information.
PLAYBACK
EFFECT Select
Menu
RM-V716U
(Provided with
GR-DVL507 only)