JVC GR-DVX48SH Digital Camera User Manual


 
42 EN
MDOESOUND
MDOE
12
BIT
ROSYNCH
ODEREC M
IN UTS/AV P
COPY
STEREO
SOUND
1
SP
OFF
OFF
NRETUR
O.O
RE NEON SC LCD/TV
UAOTIMETDATE /
T I ME CODE
–FFO
NRETUR
BEEP MELODY
NOTALLY
ID N MU BER
–60
DEMO M ODE NO
S
O
U
ND IN
–CIM
CAM ERSET
NRETUR
MSYSTE
AYDISPL
YMEMOR
VIDEO SOUND MODE
MODE
MODE
12
BIT
SYNC ROH
REC
IN UTPS/AV
END
COPY
MSYSTE
AYDISPL
YMEMOR
VIDEO
TCPROTE
DELE ET
DPOF
ATFORM
END
P
L
A
Y
O
F
F
For Playback Menu
The following procedure applies to all except Synchro
Comp ( pg. 73).
1
Set the Power Switch to “ ” while pressing down
the Lock Button located on the switch. Open the LCD
monitor fully or pull out the viewfinder fully.
2
Press the MENU Wheel in. The Menu Screen
appears.
3
Rotate the MENU Wheel to select the desired
function icon, and press it. The selected function
menu appears.
4
Rotate the MENU Wheel to select the desired
function, and press it to display the Sub Menu.
5
Rotate the MENU Wheel to select the desired
parameter and press it. Selection is complete.
6
Rotate the MENU Wheel to select “ RETURN” and
press it twice to close the Menu Screen.
Menu Screen Explanations
Display
Power Switch
MENU Wheel
NOTES:
It is also possible to change the ON SCREEN settings by
pressing DISPLAY on the remote control (provided).
“REC MODE” can be set when the Power Switch is set
to “ ” or “ ” (
pg. 13, 39).
When “S/AV INPUT” is set to “ON”, camcorder
playback cannot be viewed on the AV output.
Lock Button
USING MENUS FOR DETAILED ADJUSTMENT
(cont.)
* Actual menus differ by model and may
appear differently from these illustrations.
Some menu items may not be unavailable
on your model.
CONTINUED ON NEXT PAGE
pg. 44.
pg. 44.
pg. 73.
Allows you to set the video
recording mode (SP or LP)
depending on your preference
( pg. 13). It is recommended
you use “REC MODE” in the
VIDEO” when using this
camcorder as a recorder during
digital dubbing ( pg. 57, 58).
ON: Enables dubbing of images
recorded on a tape to a memory
card ( pg. 60).
OFF: Enables snapshots to be
taken during video playback.
ON: Enables audio/video signal
input from the AV and S-VIDEO
connectors ( pg. 57).
OFF: Enables audio/video signal
output to a TV, VCR, etc. via the
AV (headphone) and S-VIDEO
connectors ( pg. 22, 57).
VIDEO
SOUND MODE
12BIT MODE
SYNCHRO
REC MODE
COPY
(GR-DVX78
only)
S/AV INPUT
(GR-DVX78
only)