JVC GR-DVX78EA Digital Camera User Manual


 
50 EN
SNAP MODE
FULL
MULT I –
4
MULT I –
9
PIN–UP
FRAME
P
L
A
Y
O
F
F
FOR RECORDING
(cont.)
Snapshot (For Video Recording)
This feature lets you record still images that look like
photographs onto a tape.
SNAPSHOT MODE SELECTION
1
Set the VIDEO/DSC Switch to “VIDEO” (GR-DVX78
only), then set the Power Switch to “ ” while
pressing down the Lock Button located on the
switch. Open the LCD monitor fully or pull out the
viewfinder fully.
2
Press the MENU Wheel in. The Menu Screen
appears.
3
Rotate the MENU Wheel to select “ CAMERA”.
Press it. The CAMERA Menu appears.
4
Rotate the MENU Wheel to select “SNAP MODE”,
then press it.
5
Rotate the MENU Wheel to select the desired
Snapshot mode, then press it. Rotate the MENU
Wheel to select “ RETURN” and press it twice. The
Menu Screen closes.
•The available Snapshot modes are as the same as
those on page 27.
SNAPSHOT RECORDING
1
Press SNAPSHOT. appears while the snapshot
is being taken.
If you press during Record-Standby . . .
.... “PHOTO” appears and a still image will be
recorded for approx. 6 seconds, then the
camcorder re-enters the Record-Standby mode.
If you press during Recording . . .
.... “PHOTO” appears and a still image will be
recorded for approx. 6 seconds, then the normal
recording resumes.
•Regardless of the Power Switch position (“ ” or
”), Snapshot recording takes place using the
selected Snapshot mode.
•To use the flash (GR-DVX78 only), pg. 54.
Motor Drive Mode
Keeping SNAPSHOT pressed provides an effect similar to
serial photography. (Interval between still images:
approx. 1 second)
The Motor Drive mode is disabled when “REC SELECT”
is set to “ / ” in the Menu Screen
( pg. 41).
Display
SNAPSHOT
Button
VIDEO/DSC Switch
(GR-DVX78 only)
Power Switch
MENU Wheel
CAMERA Menu
Lock Button
NOTES:
To remove the shutter sound,
“BEEP” on
pg. 38, 40.
Even if “MULTI-4” or “MULTI-9” is engaged,
Snapshot recording will be performed in the
FULL mode during Digital Zoom or Night-
Scope (
pg. 45).
If Snapshot recording is not possible, “␣
blinks when SNAPSHOT is pressed.
If Program AE with special effects (
pg. 46)
is engaged, certain modes of Program AE
with special effects are disabled during
Snapshot recording. In such a case, the icon
blinks.
If SNAPSHOT is pressed when “DIS” is set
to “ON” (
pg. 39), the Stabiliser will be
disabled.
During playback as well, all snapshot modes
are available when “ COPY” is set
to “OFF” in the Menu Screen (
pg. 42).
However, the shutter sound is not heard.
When a cable is connected to the AV
connector, the shutter sound is not heard
from the speaker, however it is recorded
onto the tape.
GR-DVX78 only