JVC GR-DVX78SH Digital Camera User Manual


 
EN61
-
MA I L CL IP
E
-
M
R
A
E
I
C
L
OR
C
D
L
I
I
N
P
G
E
-
MA
S
I
T
L
AN
C
D
L
B
I
Y
P
E
-
MA I L CL IP
READY
COMPLETED
P
L
A
Y
O
F
F
e
E
Play/Pause Button
(4/6)
Power
Switch
E-MAIL CLIP
REC Button
Dubbing Moving Images Recorded On A
Tape To A Memory Card (E-Mail Clip
Recording) (GR-DVX78 only)
You can make video clips from recorded video footage
and store them in a memory card as files which can be
conveniently sent via e-mail.
1
Load a memory card ( pg. 14) and cassette
( pg. 12).
2
Set the VIDEO/DSC Switch to “VIDEO”, then set the
Power Switch to “ ” while pressing down the
Lock Button located on the switch.
3
Press 4/6 to start video playback, then press E-MAIL
CLIP REC to engage the Record-Standby mode.
•“E-MAIL CLIP STANDBY” appears and then “E-
MAIL CLIP READY” appears.
4
At the moment you find the image you wish to dub,
press the Recording Start/Stop Button to start dubbing.
•“E-MAIL CLIP RECORDING” appears.
•The camcorder stops E-Mail Clip Recording
automatically after approx. 20 seconds and
“E-MAIL CLIP COMPLETED” appears.
•Refer to the instruction manual of the provided
software to transfer the video clips to a PC.
To cancel E-Mail Clip Recording . . .
… after step 3, press E-MAIL CLIP REC again or press 5
to stop video playback.
To view video clips stored in a memory card . . .
… during normal playback of image, press SELECT once
to engage the video clip mode. “E-CLIP” appears.
Then pressing 4/6 can allow you to view the video
clips in the LCD monitor or viewfinder; video clips
cannot be displayed on a connected TV. ( pg. 29)
You can look for the desired file using Index Screen
(
pg. 30).
NOTES:
Playback operation cannot be performed during E-Mail
Clip Recording.
If you press the Recording Start/Stop Button while E-Mail
Clip Recording is in progress, only the portion which is
recorded before Recording Start/Stop Button is pressed will
be stored in the memory card.
Also, if the end of the tape is reached during E-Mail Clip
Recording, that portion will be automatically stored in the
memory card.
If the end of the tape is reached in step 3, the E-Mail Clip
Record-Standby mode will be automatically cancelled.
The video clip files stored with this camcorder are
compatible with MPEG4. Some MPEG4 files stored with
other devices cannnot be played back with this camcorder.
The sound cannot be played back when you view the
video clips stored in the copy-protected SD Memory Card.
Video noise may appear while viewing video clips in the
LCD monitor or viewfinder, however, this noise is not
present in the actual video clips stored in the memory card.
MENU Wheel
Lock
Button
Display
Storing is complete.
Recording
Start/Stop
Button
When the Recording Start/Stop
Button is pressed.