Filter
Top Products
EN 13
T
W
T
W
T
W
T
W
FEATURE: Zooming
PURPOSE: To vary the length of the focal lens
and produce zoom in/out effect.
OPERATION:
Zoom In
1) Pull the power zoom switch down
toward “T”.
Zoom Out
2) Push the switch up toward “W”.
NOTES: ●
The further the power zoom switch
is pushed or pulled, the faster the
zoom speed becomes.
●
Focusing may become unstable
during zooming. In this case, set
zoom while in Record–Standby,
set manual focus or Focus Lock
(
੬
pgs. 20, 21), then zoom in or
out in Record mode.
FEATURE: Quick Review
PURPOSE: To check end of last recording for
confirmation.
OPERATION: 1) Press “ ” for less than 2 seconds
during Record–Standby mode.
•Tape is rewound for about 2
seconds and played back
automatically, then pauses in
Record–Standby mode for next
shot.
NOTE:
Distortion may occur at start of
playback. This is normal.
FEATURE: Retake
PURPOSE: To re-record certain segments.
OPERATION: 1) Make sure camcorder is in
Record–Standby mode.
2) Press either RETAKE button to
reach start point for new
recording.
3) Press Recording Start/Stop to start
recording.
NOTE:
Noise may appear during Retake.
This is normal.
RETAKE
Power zoom switch
Zoom indicator
RECORDING
Basic Features
Zoom-in
Zoom-out