Filter
Top Products
22
DEMO MODE
Demonstrates certain functions automatically.
Available when the Power Switch
! is set to “ ”
or “
” and “DEMO MODE” is set to “ON” (factory-
preset). Performing any operation during the
demonstration stops the demonstration
temporarily. Set to OFF to stop completely.
•When a tape whose erase protection tab is in the
position that allows recording is loaded in the
camcorder, demonstration is not available.
•If you do not detach the Lens Cap, you cannot
see the actual changes of the Automatic
Demonstration activated on the viewfinder.
DATE/TIME
Allows you to set the current date and time.
(
੬ pg. 7)
GR-AX890_17-22_EN 18/11/03, 9:39 AM22