Filter
Top Products
52 EN
D.S.C. SHOOTING
Advanced Features (cont.)
= Factory setting and when the Select Dial is set to AUTO LOCK
OFF
ON
ON
OFF
OFF
ON
D. ZOOM
INT. TIME
TALLY LAMP
REC TIME
TITLE LANG.
COLOR BAR
JLIP ID NO.
DEMO MODE
Menu Screen Explanations (cont.)
Setting is impossible.
This feature allows you to set the parameters for Self-Timer (੬ pg. 38).
The tally lamp comes on to signal the start of recording.
The tally lamp remains off at all times.
Allows you to select the language (ENGLISH, FRENCH, SPANISH or PORTUGUESE)
of Instant Titles (੬ pg. 30) .
Allows you to use the Digital Zoom. By digitally processing and
magnifying images, zooming is possible from 22 times (the
optical zoom limit), to a maximum of 44 times digital magnifi-
cation.
Digital Zoom is not available. Only optical zoom (maximum
22x magnification) can function. When set to “OFF” during
Digital Zoom, zoom magnification changes to 22x.
Does not display color bars. Normal screen is recorded.
Makes the normal screen disappear, then displays color bars.
By recording color bars at the beginning or end of a tape, an
effect similar to professional productions can be given to your
tape.
NOTE:
While the color bars are displayed, the camcorder’s other
functions are disabled.
This number is necessary when connecting the camcorder to a device such as a
computer using the J terminal (JLIP). The numbers range from 01 to 99. Factory
setting is 07.
Automatic demonstration will not take place.
Demonstrates certain functions such as Fade/Wipe, Instant
Titles etc. When “DEMO MODE” is set to “ON” and the Menu
Screen is closed, demonstration starts.
NOTES:
●When a tape whose Erase Protection tab is in the position that
allows recording is loaded in the camcorder, demonstration is
not available.
●By turning off the camcorder, “DEMO MODE” is set to “OFF”
automatically.
●During demonstration, all functions except zoom are
disabled.
ON
OFF