JVC GR-D50 Camcorder User Manual


 
EN
24
USING MENUS FOR DETAILED ADJUSTMENT
TIME CODE
[OFF]: Time code is not displayed.
ON: Time code is displayed on the camcorder and on
the connected TV. Frame numbers are not displayed
during recording.
CLOCK ADJ.
Allows you to set the current date and time ( pg. 10).
VIDEO
SOUND MODE
........ pg. 25, Playback Sound.
12BIT MODE
........ pg. 25, Display.
SYNCHRO
........ pg. 32, For More
Accurate Editing.
REC MODE
Allows you to set the tape recording mode ([SP] or
LP) depending on your preference ( pg. 10).
It is recommended you use REC MODE in the
VIDEO Menu when using this camcorder as a
recorder during dubbing (GR-D50/D30 only, pg. 26,
27).
•“REC MODE can be set when the Power Switch y is
set to PLAY or ( pg. 10, 21).
S/AV INPUT
(GR-D50/D30 only)
ON: Enables audio/video signal input from the AV and
S-VIDEO connectors ( pg. 26).
[OFF]: Enables audio/video signal output to a TV,
VCR, etc. via the AV and S-VIDEO connectors
( pg. 15, 26).
When S/AV INPUT is set to ON, camcorder
playback cannot be viewed on the AV output.
SYSTEM
Each setting is linked with SYSTEM, which
appears when the Power Switch y is set to
( pg. 23).
The parameters are the same as in the description on
pg. 23.
[ ] = Factory-preset
IVDE
O
MDOESOUND
MDOE
12
BIT
ROSYNCH
ODEREC M
STEREO
SOUND
1
OFF
O.O
NPUT
S/
AV I
RETURN
For Playback Menu
The following procedure applies to all except Synchro
Comp ( pg. 32).
1 Set the Power Switch y to PLAY while pressing
down the Lock Button t located on the switch.
2 Press the MENU/VOLUME wheel $ in. The Menu
Screen appears.
3 Rotate the MENU/VOLUME wheel $ to select the
desired function menu, and press it.
4 Rotate the MENU/VOLUME wheel $ to select the
desired function, and press it to display the Sub Menu.
5 Rotate the MENU/VOLUME wheel $ to select the
desired parameter and press it. Selection is complete.
6 Rotate the MENU/VOLUME wheel $ to select
RETURN and press it twice to close the Menu
Screen.
MELODY
EEPB
RETURN
AM RESETC
LCD
RIORITYP
ON
EMO MODED
ON
EMOTER
ON
ALLYT
SYSTE
M
01 D50/40/30/20EK 16-27 02.12.4, 19:1124