JVC GR-DF573 Camcorder User Manual


 
MasterPage: Heading0_Left
52 EN
EDITING
A To S-VIDEO IN or OUT*
B Yellow to VIDEO IN or OUT
C Red to AUDIO R IN or OUT
D White to AUDIO L IN or OUT
* Connect when your TV/VCR has an S-VIDEO IN/
OUT connector. In this case, it is not necessary to
connect the yellow video cable.
NOTE:
The S-Video cable is optional. Be sure to use the
YTU94146A S-Video cable. Consult the JVC
Service Center described on the sheet included
in the package for details on its availability.
Make sure to connect the end with a core filter
to the camcorder. The core filter reduces
interference.
To use this camcorder as a player
1 Following the illustrations, connect the
camcorder and the VCR’s input connectors.
2 Start playback on the camcorder. (pg. 22)
3 At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR’s
instruction manual.)
4 To stop dubbing, stop recording on the VCR,
then stop playback on the camcorder.
NOTES:
It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
(pg. 15)
To choose whether or not the following displays
appear on the connected TV
Date/time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.
(pg. 37, 42) Or, press DISPLAY on the
remote control to turn on/off the date indication.
Time code
Set “TIME CODE” to “OFF” or “ON”.
(pg. 37, 42)
Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/
TV”. (pg. 37, 42)
To use this camcorder as a recorder
1 Following the illustrations, connect the
camcorder and the VCR’s output connectors.
2 Set “REC MODE” to “SP” or “LP”. (pg. 38)
3 Set the camcorder’s Power Switch to “PLAY”.
4 Set “S/AV INPUT” to “ON”. (pg. 37, 42)
5 Press the Recording Start/Stop Button to
engage the Record-Pause mode.
The “ ” indication appears on the screen.
6 Start playback on the player.
7 At the point you want to start dubbing, press
the Recording Start/Stop Button to start
dubbing. The indication rotates.
8 Press the Recording Start/Stop Button again
to stop dubbing. The indication stops
rotating.
9 Press 8 to return to the normal playback
mode.
NOTES:
After dubbing, set “S/AV INPUT” back to “OFF”.
Analogue signals can be converted to digital
signals with this procedure.
It is also possible to dub from another camcorder.
Dubbing To Or From A VCR
2413
TV
VCR
Open the cover.
AV cable
(provided)
To AV connector
To S connector
S cable
(optional)
A/V
IN
GR-DF573_473ASIA.book Page 52 Monday, June 13, 2005 5:38 PM