Filter
Top Products
EN69
INDEX
Indications
LCD Monitor/Viewfinder Indications
During Video Recording Only
No. Function
1 Displays the selected Fade/Wipe effect.
(੬ pg. 28, 29)
2 Appears when in the Squeeze or Cinema
mode. (੬ pg. 26)
3
*
Displays the recording mode (SP or LP).
(੬ pg. 13)
4
*
Displays the tape remaining time.
(੬ pg. 16)
5
*
•“REC” appears during recording.
•“PAUSE” appears during Record-
Standby mode. (੬ pg. 16)
6 Appears when the wind cut mode is engaged
to cut down on noise created by wind.
(੬ pg. 27)
7 Appears when the Insert Editing (w) or Insert
Editing Pause (6w) mode is engaged.
(੬ pg. 61)
8 Appears while the tape is running.
(੬ pg. 16)
9 Displays the sound mode for approx.
5 seconds after turning on the camcorder.
(੬ pg. 25)
0 Displays the Time Code. (੬ pg. 21, 27)
*Setting “ON SCREEN” to “SIMPLE” in the Menu
Screen removes indications marked with * from the
screen (੬ pg. 27, 34).
No. Function
1
Appears when the VIDEO/DSC Switch is set
to “
” and the Power Switch is set to
“ ” or “ ”. (੬ pg. 15, 19)
2 Appears and blinks during shooting.
(੬ pg. 19)
3 Displays the Picture Quality mode of the
stored image. There are 2 modes available:
FINE and STD (Standard). (੬ pg. 14, 19)
4 Appears during shooting.
(੬ pg. 19)
5 Displays the number of images that have
already been shot. (੬ pg. 19)
6 Displays the total number of shots that can
be stored, including those already taken.
(
੬ pg. 19)
LCD Monitor/Viewfinder Indications During D.S.C. Recording Only
TC
S
2
O
3
U
:
N
2
D
5
12
BIT
SP
3
R
4
5
E
4
6
C
4
w
0 9
1 2 3
*
4
*
8 7 6 5
*
DSC
STD
10/30
1 532 4 6