Filter
Top Products
EN 13
Master Page: Right
GR-DVX709SH_09-17.fm Page 13
Align the screw on the tripod with the camcorder’s
mounting socket. Then tighten the screw.
● Some tripods are not equipped with studs.
While using the LCD monitor:
Make sure the viewfinder is pushed back in. Open
the LCD monitor fully. It can rotate 270º (90º
downward, 180º upward).
While using the viewfinder:
Make sure the LCD monitor is closed and locked.
Pull out the viewfinder fully.
● Be sure to pull out the viewfinder until you hear a
click, otherwise it may be pushed back in during
use.
Rotate the MENU (MENU/BRIGHT) Wheel until the
bright level indicator on the display moves and the
appropriate brightness is reached.
● If you are using GR-DVX709, it is also possible to
adjust the brightness of the viewfinder as
described above.
Tripod Mounting
CAUTION:
When attaching the camcorder to a tripod, extend
its legs to stabilise the camcorder. It is not advised
to use small sized tripods. This may cause damage
to the unit by falling over.
LCD Monitor And Viewfinder
Brightness Adjustment Of The
Display
180˚
90˚
BR IGHT
MENU/
BRIGHT Wheel
GR-DVX709SH_09-17.fm Page 13 Wednesday, February 27, 2002 2:47 PM