Filter
Top Products
EN43
VCR
TV
*Connect when the S-Video cable is not used.
POWER Switch
To S
S-Video
cable
(provided)
Red to
AUDIO R
Yellow to
VIDEO*
White to
AUDIO L
Audio/Video cable
[RCA plug to RCA plug]
(provided)
Lock Button
Core filter
Dubbing From A VCR
[To use this camcorder as a recorder]
1
Make sure all units are turned off, then connect the
camcorder and the VCR as shown in the illustration.
Also refer to pg. 38 and 39.
2
Set “SOUND MODE” to “12 BIT” or “16 BIT” and
“REC MODE” to “SP” or “LP” in the Menu Screen
depending on your preference (੬ pg. 11, 22, 23).
3
Set the camcorder’s POWER Switch to “ ”
while pressing down the Lock Button located on the
switch. Turn on the VCR’s power and insert the
appropriate cassettes in the camcorder and the VCR.
4
Set “AV/S-VIDEO” to “IN” in the Menu Screen to
engage the analogue input mode (੬ pg. 35).
5
Press START/STOP on the camcorder to engage the
Record-Pause mode. “AV. IN” appears on the screen.
6
Engage the VCR’s Play mode, then engage the Still
Playback mode when you have found a spot just
before the edit-in point.
7
Press START/STOP on the camcorder to engage the
Record mode. “
AV. IN
” appears on the screen.
Engage the VCR’s Play mode.
8
To stop dubbing, press START/STOP on the
camcorder so that “AV. IN” reappears, then engage
the VCR’s Stop mode.
9
Repeat steps 6 through 8 for additional editing.
10
Set “AV/S-VIDEO” back to “OUT” in the Menu
Screen to disengage the analogue input mode
(੬ pg. 35).
NOTES:
●
When connecting the cables, make sure to connect the
ends with a core filter to the camcorder. The core filter
reduces interference.
●
It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery pack
(
੬
pg. 7).
●
Analogue signals can be converted to digital signals with
this procedure.
●
It is also possible to dub from another camcorder.
To AUDIO,
VIDEO* and
S-VIDEO OUT
connectors