Filter
Top Products
EN41
MAKE CONNECTIONS
1
JVC VCR EQUIPPED WITH REMOTE
PAUSE TERMINAL
Connect the editing cable to the Remote PAUSE
terminal.
JVC VCR NOT EQUIPPED WITH REMOTE
PAUSE TERMINAL BUT EQUIPPED WITH
R.A. EDIT CONNECTOR
Connect the editing cable to the R.A.EDIT
connector.
VCR OTHER THAN TYPE OR
Connect the editing cable to the remote control’s
PAUSE-IN connector.
2
Insert a recorded tape into the camcorder and set the
Power Switch to “ ”.
3
Turn the VCR power on, insert a recordable tape and
engage the AUX mode (refer to the VCR’s
instructions).
NOTE:
If your VCR has an S-Video input connector, connect the
camcorder and the VCR using the provided S-Video cable.
This can improve the dubbed picture quality.
S-Video
cable
(provided)
To
J terminal
(JLIP)
Open
the cover.
To Video Output
and Audio Output
connectors
To S-Video
Output
connector
To Remote
PAUSE
VCR
TV
To PAUSE-IN
Editing cable
(ø3.5 mini-
plug cable)
(provided)
To Audio, Video
and S-Video Input
connectors
A/V cable
(provided)
CONTINUED ON NEXT PAGE.