Filter
Top Products
17
MENU SETTINGS
SYSTEM MENU 2
Demonstrates certain functions automatically.
Available when the Power Switch
#
is set to “ ”
or “ ” and “DEMO MODE” is set to “ON” (factory-
preset).
• To cancel demonstration, set "DEMO MODE"
to “OFF”.
• Pressing MENU Wheel
1
directly accesses
DEMO MODE menu while the demo is in
progress.
• Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for
more than 1 minute after that, the
demonstration will resume.
• “DEMO MODE” remains “ON” even if the
camcorder power is turned off.
• When a cassette is in the camcorder
demonstration is not available.
• If you do not detach the Lens Cap, you cannot
see the actual changes of the Automatic
Demonstration activated on the LCD monitor
or viewfinder.
You can shoot a series of pictures, each slightly
different, of the same object for a brief selected
period of time (Animation). REC MODE should be
set to “SP”.
Select the desired recording time and press the
Recording Start/Stop Button
!
after focusing on
the subject.
• Fade-or wipe-in/out cannot be performed.
• This function is cancelled when the power is
turned off or when the cassette is ejected.
• To use this function, it is recommended that
SCROLL in TITLE SETUP (੬ pg. 16) be set to
“OFF”.
You can record sequentially at preset time spans.
Leaving the camcorder aimed at a specific
subject, you can record subtle changes over an
extended period of time (Time-Lapse). REC
MODE should be set to “SP”.
(Please note that it is necessary to set the REC
TIME (Animation) in the SYSTEM MENU before
performing the INT. TIME (Time-Lapse) function.)
Select the desired interval time and press the
Recording Start/Stop Button
!
.
• Fade- or wipe-in/out cannot be performed.
• This function is cancelled when the power is
turned off or when the cassette is ejected.
• To use this function, it is recommended that
SCROLL in TITLE SETUP (੬ pg. 16) be set to
“OFF”.
VCR MENU
Makes it easier to locate a specific tape segment.
1) Set the Power Switch
#
to "PLAY" while
pressing down the Lock Button
"
.
2) Press the MENU Wheel
1
in. The VCR MENU
screen appears.
3) Rotate the MENU Wheel
1
to select
“COUNTER MEMORY” and press it. Then,
rotate the MENU Wheel
1
to “ON” and press
it. (“M” appears when you return to normal
screen.)
4) Rotate the MENU Wheel
1
to select
"COUNTER RESET” and press it. Then, rotate
the MENU Wheel
1
to “YES” and press it. The
counter resets to “0:00:00”.
5) To return to normal screen, rotate the MENU
Wheel
1
to “3EXIT” and press it.
6) After recording or playback, press 7
(
, then
1
)
. The tape automatically stops at or
close to 0:00:00.
7) Press 3/8
&
to start playback.
• The counter memory functions in both Fast-
Forward and Rewind modes.
DEMO MODE
REC TIME
INT. TIME
COUNTER MEMORY
2 EXI T
VC
COUNTER RESET
RME
O
Y
N
F
E
U
F
S
COUNTER MEMORY
GR-FXM42EN(EK)2.fm Page 17 Friday, December 2, 2005 9:46 AM