JVC GZ-MG130UA Camcorder User Manual


 
12
Be sure to confi gure the following three
settings before use.
Charging the Battery Pack
1 Set the power/mode switch to OFF.
Slide while pressing down the lock button.
MODE
OFF
(CHARGE)
ON
2 Attach the battery pack.
Slide the battery pack down until it locks
in place.
3 Connect the AC adapter.
The access/charge lamp blinks to indicate
charging has started.
When the lamp goes out, charging is
fi nished. Unplug the AC adapter from the
AC outlet and disconnect the AC adapter
from the camera.
Necessary Settings before Use
MENU
Access/Charge Lamp
Power/Mode Switch
Set Lever
Bottom of the Camera
BATT.
Required charging / recording time
(approx.)
The values within ( ) are the times when the
LED light is on.
Battery pack
Charging
time
Recording
time
BN-VF808U
(Provided)
1 hr. 30 min.
1 hr. 35 min.
(1 hr. 30 min.)
BN-VF815U 2 hr. 40 min.
3 hr. 15 min.
(3 hr. 5 min.)
BN-VF823U 3 hr. 50 min.
4 hr. 55 min.
(4 hr. 35 min.)
8 To detach the battery pack
Slide and hold BATT. (
step 2), then
remove the battery pack.
8 To check the remaining battery power
See page 14.
NOTES
You can also use the camera with just the AC
adapter.
Please do not pull or bend the AC adapter plug
and cable. This may damage the AC adapter.
DC Connector
AC Adapter
To AC Outlet
(110V to 240V)
Open the cover.
Power
Cord