Filter
Top Products
42 EN
INDEX
Viewfinder
10
:
2425
.
12
.
97
MERRY CHR ISTMAS
TAPE END
–
05
MWB
DISP.
REC SP
SEPIA
LENS COVER
FADE
18MIN
T30
1MIN
1/2S
INDEX
PAUSE
8
9
0
1
2 6 7
%
&
^
*
(
)
q
!
#
$
@
43 5
e
w
Viewfinder Indications
% Battery Pack Remaining Power Indicator
Changes as follows according to the battery pack’s
remaining power level: “
”.
When the power is almost gone, the indicator
blinks, then the unit shuts off. Replace the
battery pack with a fully charged one.
(Note: The symbol containing 3 darkened
squares —
— does not necessarily mean
that the battery pack is fully charged.)
^ Focus Indicator .................................. ੬ pg. 16
& Exposure Level Indicator.....................੬ pg. 15
* White Balance Mode Indicator ...........੬ pg. 21
( Menu Setting Change Indicator...........੬ pg. 22
) Index Code Marking .......................... ੬ pg. 35
q Clock Warning
Displayed for about 5 seconds if the clock
(lithium) battery is not in place or is exhausted
when power is turned on. Also displayed for
about 5 seconds when clock battery becomes
exhausted while using the camcorder.
For inserting or replacing the clock
battery .................................................. ੬ pg. 6
w Condensation Warning
When this indication appears, all functions are
disabled. Turn the unit off (without removing the
power source) for a few hours, and when you
turn it on again the indicator should disappear.
e Tape End Display ............................... ੬ pg. 10
Appears when the end of the tape is reached
during playback, recording or fast-forward.
1 Cassette Warning/Remaining
Tape Time .......................................... ੬ pg. 10
When no cassette is inserted or when Erase
Protection tab is not in the position that allows
recording, the Cassette ( ) Warning blinks.
Otherwise, the Remaining Tape Time is
displayed.
2 Recording mode [SP/LP] indicator ......੬ pg. 8
3, 9 PROGRAM AE Indicator................੬ pg. 14
Displayed at 3 for approx. 1 second when the
PROGRAM AE select dial is switched from one
position to another. Then only the indicator
remains at 9.
4 Program Manager Function
Indication .......................................... ੬ pg. 18
Appears when the PROGRAM AE select dial is
set to any position other than AUTO LOCK.
5 Lens Cover Warning .......................... ੬ pg. 10
6 Tape Length Display .......................... ੬ pg. 8
7 Zoom Level Indicator......................... ੬ pg. 11
8 Recording Indicator ........................... ੬ pg. 10
0 Fade–Standby Indicator ......................੬ pg. 18
! Interval Time/Recording
Time Indicator.................................... ੬ pg. 24
@ Record–Standby Mode Indicator.........੬ pg. 10
# Instant Title Display ........................... ੬ pg. 19
$ Date/Time Character Display ..............੬ pg. 20