JVC GR-D270U Camcorder User Manual


 
VIDEO PLAYBACK
22 EN
MasterPage: Left
A Yellow to VIDEO IN (Connect when your TV/
VCR has only A/V input connectors.)
B Red to AUDIO R IN*
C White to AUDIO L IN*
* Not required for watching still images only.
1 Make sure all units are turned off.
2 Connect the camcorder to a TV or VCR as
shown in the illustration.
If using a VCR, go to step 3.
If not, go to step 4.
3 Connect the VCR output to the TV input,
referring to your VCR’s instruction manual.
4 Turn on the camcorder, the VCR and the TV.
5 Set the VCR to its AUX input mode, and set
the TV to its VIDEO mode.
6 Start playback on the camcorder. (pg. 20)
To choose whether or not the following
displays appear on the connected TV
Date/Time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.
(pg. 31, 36)
Or, press DISPLAY on the remote control
(provided with
GR-D290 only) to turn on/off the
date indication.
Time Code
Set “TIME CODE” to “ON” or “OFF”.
(pg. 31, 36)
Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”.
(pg. 31, 36)
NOTES:
It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
(pg. 14)
To monitor the picture and sound from the
camcorder without inserting a tape or memory
card, set the camcorder’s Power Switch to “A” or
M”, then set your TV to the appropriate input
mode.
Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
Connections To A TV Or VCR
213
TV
VCR
Open the cover.
To AV
connector
Audio/Video cable
(provided)
GR-D290_270US.book Page 22 Tuesday, November 30, 2004 9:53 AM