Filter
Top Products
EN53
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
19.
Even when Slow Shutter is
not selected, the image
looks like it is activated.
20.
There is no strobe when
the Classic Film or Strobe
mode is activated.
21.
White Balance cannot be
activated.
22.
When shooting a subject
illuminated by bright light,
vertical lines appear.
23.
When the screen is under
direct sunlight during
shooting, the screen
becomes red or black for
an instant.
24.
During recording, the date/
time does not appear.
25.
The indicators and
messages do not appear.
19
•When shooting in the dark,
the unit becomes highly
sensitive to light and the
image takes on an effect
similar to Slow Shutter.
20.
•The Picture Wipe or
Dissolve function is in use.
21.
•The Sepia or Monotone
mode is activated.
22.
•This is a result of exceed-
ingly high contrast, and is
not a malfunction.
23.
•This is not a malfunction.
24.
•“DATE/TIME” is set to
“OFF” in the Menu Screen.
•Self-Recording is performed.
25.
•“ON SCREEN” is set to
“SIMPLE” or “TIME CODE”
is set to “OFF” in the Menu
Screen.
19.
•If you want the lighting to
look more natural, set GAIN
UP to “AGC” or “OFF” in
the Menu Screen
(੬ pg. 21).
20.
•Do not try to use the Classic
Film or Strobe mode during
a scene transition
(੬ pg. 24, 26).
21.
•Turn off Sepia or Monotone
before setting White
Balance (੬ pg. 26, 28).
22.
————
23.
————
24.
•Set “DATE/TIME” to “ON”
in the Menu Screen
(੬ pg. 23).
•During Self-Recording, the
date/time does not appear
(੬ pg. 13).
25.
•Set “ON SCREEN” to “LCD”
or “LCD/TV” and set
“TIME CODE” to “ON”
in the Menu Screen
(੬ pg. 23, 30).
CONTINUED ON NEXT PAGE