Filter
Top Products
EN
67
CONTINUED ON NEXT PAGE
• Shooting was performed under
backlit conditions.
• The subject is too bright.
• 10X optical zoom is selected.
• The VIDEO/MEMORY Switch is set
to “MEMORY”.
• The Sepia or Monotone mode is
activated.
• When shooting in the dark, the unit
becomes highly sensitive to light
and the image takes on an effect
similar to Slow Shutter.
• The Sepia or Monotone mode is
activated.
• This is a result of exceedingly high
contrast, and is not a malfunction.
• This is not a malfunction.
• “DATE/TIME” is set to “OFF” in the
Menu Screen.
• Files stored on the memory card
are protected.
• “TIME CODE” is set to “OFF” in the
Menu Screen.
• In places subject to low tempera-
ture, images become dark due to
the characteristics of the LCD
monitor. When this happens, the
displayed colors differ from those
that are actually recorded. This is
not a defect of the camcorder.
• When the LCD monitor's fluores-
cent light reaches the end of its
service life, images on the LCD
monitor become dark. Consult your
nearest JVC dealer.
• Press the BACKLIGHT Button
(
੬ pg. 42).
• Set “PROGRAM AE” to
“SPOTLIGHT” in the Menu Screen
(
੬ pg. 36).
• Set “ZOOM” to “40X” or “700X” in
the Menu Screen (
੬ pg. 45).
• Set the VIDEO/MEMORY Switch to
“VIDEO” (
੬ pg. 17, 18).
• Turn off Sepia and Monotone
(
੬ pg. 36, 37).
• If you want the lighting to look
more natural, set GAIN UP to
“AGC” or “OFF” in the Menu
Screen (
੬ pg. 45).
• Turn off Sepia or Monotone before
setting White Balance (
੬ pg. 37,
43).
————
————
• Set “DATE/TIME” to “ON” in the
Menu Screen (
੬ pg. 47).
• Remove protection from the files
stored on the memory card and
delete them (
੬ pg. 30, 31).
• Set “TIME CODE” to “ON” in the
Menu Screen (
੬ pg. 47, 48).
• Adjust the brightness and angle of
the LCD monitor (
੬ pg. 16, 17).
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
0 The image taken using
Snapshot is too dark.
! The image taken using
Snapshot is too bright.
@ Digital Zoom does not work.
# The Black & White Fader
does not work.
$ Even when Slow Shutter is
not selected, the image
looks like it is activated.
% White Balance cannot be
activated.
^ When shooting a subject
illuminated by bright light,
vertical lines appear.
& When the screen is under
direct sunlight during
shooting, the screen
becomes red or black for an
instant.
* During recording, the date/
time does not appear.
( Files stored on the memory
card cannot be deleted.
) Time code does not appear.
q Images on the LCD monitor
appear dark or whitish.
1 GR-DVL822U_EN 58-75 02.5.11, 09:53 AM67