JVC GR-DVL9000 Camcorder User Manual


 
EN 77
%Progressive Dial (PROGRESSIVE)
(
pg. 28, 44)
Turn for Progressive Video Recording or Pro
Snapshot Recording.
^Progressive Button ( pg. 28, 44)
When this button is pressed, the camcorder starts
Progressive Mode Recording (high resolution).
When pressed during playback, a playback
snapshot is taken.
&OPEN/EJECT switch ( pg. 12)
Slide the switch down when loading/unloading a
tape.
*Speaker ( pg. 50)
During playback, the sound can be heard.
(PUSH-OPEN Button ( pg. 12)
Press to open the LCD monitor.
)Power dial ( pg. 18)
Turning the camcorder on/off, recording or
playback is possible.
qMENU button ( pg. 31)
Press this button to make the Menu appear.
ON/OFF button ( pg. 22)
Press and hold this button for more than approx.
1 second to make the indications appear on the
LCD monitor or the viewfinder.
wFunction Navigator Dial (Select Dial)
(
pg. 22, 31)
Adjusts the brightness of the LCD monitor or
selects the Menu etc. Referred to in this manual
as “Select Dial”.
eSTART/STOP button ( pg. 18)
Starts recording or stops recording to make the
camcorder enter the record-standby mode.
rViewfinder ( pg. 15)
Pull out when recording.
1 Zoom switch or volume switch (VOL.)
(
pg. 24, 50)
Adjusts zoom during recording or the sound
volume during playback.
2 Grip strap ( pg. 14)
3 Tally lamp
Lights during recording.
4 Remote sensor ( pg. 52)
Receives the signal from the remote control.
When using the remote control, point it at the
remote sensor.
5 Lens cover
Opens when the viewfinder is pulled out or the
LCD monitor is opened fully.
6 Stereo microphone ( pg. 68)
For use when recording or audio dubbing.
7 External microphone input connector
(MIC) (Stereo) (
pg. 68)
An optional microphone can be connected.
8 JLIP (Joint Level Interface Protocol)
(DIGITAL STILL) output connector
(
pg. 58)
Outputs the digital still image to a personal
computer.
9 EDIT jack
Using an editing cable, connect to the remote
control or VCR ( pg. 63)
0 RESET button ( pg. 74)
When a malfunction occurs, press this button
after removing the power supply (battery etc.).
Pressing this button also resets the date/time or
various settings.
! Stop button (5) ( pg. 50)
Stops playback of the tape.
@ Play/Pause button (6/
4
) ( pg. 50)
Plays back or stops the tape temporarily.
# Fast-Forward button (
3
) ( pg. 50)
Fast-Forwards the tape.
$ Rewind button (
2
) ( pg. 50)
Rewinds the tape.