Filter
Top Products
EN
11
–
RETURN
–
–
DSC
TYQUAL I
REC SELECT
FINE
021X7486
IMAGE SIZE
@
3
$
4 5
0
Loading A Memory Card
The provided memory card is already inserted in the
camcorder when you receive the camcorder.
1 Make sure the camcorder’s power is off.
2 Open the card cover (MEMORY CARD) 8.
3 Insert the memory card clipped edge first.
• Do not touch the terminal on the reverse side of the
label.
4 Close the card cover 8.
To Unload A Memory Card:
In step 3 push the memory card, which then comes out
of the camcorder automatically. Pull it out and close the
card cover 8.
Picture Quality/Image Size Setting
The Picture Quality/Image Size can be selected to best
match your needs. Refer to the chart on page 18 for
your selection.
1 Set the VIDEO/MEMORY Switch t to “MEMORY”,
then set the Power Switch @ to “ ” while pressing
down the Lock Button $ located on the switch. The
Power lamp 0 lights and the camcorder turns on.
2 Press MENU 4. The Menu Screen appears.
3 Press + or – 5 to select “ (DSC)” and press
SELECT/SET 3.
4 Press + or – 5 to select “QUALITY” and press
SELECT/SET 3. The Sub Menu appears. Press + or –
5 to select the desired mode and press SELECT/SET
3.
5 Press + or – 5 to select “IMAGE SIZE” and press
SELECT/SET 3. The Sub Menu appears. Press + or –
5 to select the desired mode and press SELECT/SET
3.
6 Press + or – 5 to select “ RETURN”, and press
SELECT/SET 3 twice. The Menu Screen closes.
GETTING STARTED
8
Memory card
Clipped edge
Label
NOTES:
● Be sure to use only SD Memory Cards marked “ ”
or MultiMediaCards marked “ ”.
● Some brands of memory cards are not compatible with
this camcorder. Before purchasing a memory card ,
consult its manufacturer or dealer.
● Before using a new memory card, it is necessary to
FORMAT the card.
੬ pg. 24.
ATTENTION
Do not insert/remove the memory card while the
camcorder is turned on, as this may cause the memory
card to be corrupted or cause the camcorder to
become unable to recognize whether or not the card is
installed.
Display
01 DX300/100/95/75EK_EN 01-11 2/26/03, 7:12 PM11