Filter
Top Products
EN31
: Factory-preset
Automatic demonstration will not take place.
Demonstrates certain functions such as Program AE with special effects, etc., and
can be used to confirm how these functions operate. When “DEMO MODE” is set
to “ON” and the Menu Screen is closed, demonstration starts.
Performing any operation during the demonstration stops the demonstration
temporarily. If no operation is performed for more than 1 minute after that, the
demonstration will resume.
NOTES:
● If a tape is in the camcorder, the demonstration cannot be turned on.
● “DEMO MODE” remains “ON” even if the camcorder power is turned off.
● If “DEMO MODE” remains “ON”, some functions will not be available. After
viewing demo, set to “OFF”.
Microphone Level Indicator does not appear.
Microphone Level Indicator appears when recording starts, providing the operator
with immediate visual confirmation that recording has started. Regardless of this
setting, Microphone Level Indicator does not appear when the Power Switch is set
to “
”, “ ”* or “OFF”.
* Except Audio Dubbing mode.
Color Bars do not appear.
Color bars appear on screen which allows color settings to be adjusted quickly
and easily for natural-looking picture reproduction. Regardless of this setting, color
bars do not appear in the following cases:
•When the Power Switch is set to “
”, “ ” or “OFF”.
•When the Shooting Mode Switch is set to “UXGA” or “XGA/VGA”.
•When “WIDE MODE” is set to “PS-WIDE” in the Menu Screen.
Keeps the camcorder’s display (except the date, time and time code) from
appearing on the connected TV screen.
Makes the camcorder’s display appear on screen when the camcorder is
connected to a TV.
The date/time does not appear.
Displays the date/time for approx. 5 seconds in the following cases:
•When the Power Switch is set from “OFF” to “ ” or “ ”.
•When video playback starts. The camcorder displays the date/time when scenes
are recorded.
•When the date is changed during video playback.
The date/time is always displayed.
Time code is not displayed.
Time code is displayed on the camcorder and on the connected TV. Frame
numbers are not displayed during recording.
Allows you to set the current date and time (੬ pg. 11).
Refer to “Picture Mode Setting” (
੬ pg. 16).
NOTES:
●
“ SYSTEM” and “ DISPLAY” functions which are set when the Power Switch is set to “ ” are also
applied when the Power Switch is set to “ ” (
੬
pg. 41). “CLOCK ADJ.” only appears when the Power
Switch is set to “ ”.
●
The “ DISPLAY” settings are effective even when the Power Switch is set to “ ”.
●
The “ON SCREEN” setting can also be changed by pressing the DISPLAY Button on the remote control
(provided) (
੬
pg. 55, 58, 66).
SYSTEM
OFF
ON
OFF
ON
OFF
ON
LCD
LCD/TV
OFF
AUTO
ON
OFF
ON
TIME
CODE
CLOCK ADJ.
QUALITY
SIZE
UXGA
DSC
DISPLAY
DATE/
TIME
ON
SCREEN
DEMO
MODE
MIC IND.
COLOR
BAR