Filter
Top Products
Mounting the Camera (Continued)
m
Connection
1
Attach the fall prevention wire from the ceiling to the camera
(fall prevention wire is not included)
2
Connect the coaxial cable (A page 10)
Lower the protection cover and connect the connectors.
Upon connecting, restore the protection cover to cover the connectors. This will
isolate and protect the metallic parts of the connectors from the ceiling structures.
3
Connect the power supply cable (A page 11)
4
Wrap insulation tapes around the connecting parts of the power
supply cables
Memo
Wrapping insulation tapes will improve future work conditions, as well as
reduce penetration by noise and other objects.
.
.
1
2
4
3
Fall prevention wire
Solder or caulk
Insulating tape
Protection cover
Power cable
Coaxial cable
Installation
14