Filter
Top Products
EN 31
= Factory setting and when the PROGRAM AE Select Dial is set to AUTO LOCK
NOTE:
During shooting in low light, Auto Focus accuracy may decrease even when Gain Up is used. In this case,
use Manual Focus (
੬
pg. 23).
Gain Up
OFF
15s
30s
1min
5min
OFF
1/4s
1/2s
1s
5s
Date/Time
MENU
S.LX To record a subject in a dark lit environment. When it is more
convenient to shoot the subject with a brighter image even if
the picture becomes slightly coarse. Automatically selected
when the PROGRAM AE select dial is set to AUTO LOCK
mode. (S.LX : Super LoLux)
NORM To record a subject in a dimly lit environment. When it is
more convenient to shoot with a less coarse picture although
the subject becomes slightly dark.
OFF Allows you to shoot dark scenes with no picture brightness
adjustment.
Tele Macro OFF Usually set to this position.
ON Usually the distance to a subject where the lens is in focus
depends on the zoom magnification. Unless there is a
distance more than 1m to the subject, the lens is out of focus
at the maximum telephoto setting. When set to “ON”, you
can shoot a subject as large as possible at a distance of
approx. 60 cm.
•Depending on the zoom position, the lens may go out of
focus.
Interval Timer This feature allows you to set the parameters for Self-Timer
(
੬ pg. 32) and Time-Lapse recording (੬ pg. 33).
Rec Time This feature allows you to set the parameters for Animation
and Time-Lapse recording (੬ pg. 33).
JLIP ID NO. This number is necessary when connecting the camcorder to a device such
as a computer using the J terminal (JLIP).
The numbers range from 01 to 99. Factory setting is 07.
Tally ON The tally lamp comes on to signal the start of recording.
OFF The tally lamp remains off at all times.
Set Character Allows you to input characters. (੬ pg. 27).
Allows you to set the current date and time (
੬ pg. 9).