JVC LYT0089-001A Camcorder User Manual


 
EN 7
3
4
2
1
2
1
3
Using the battery pack
1
Hook-on the battery pack’s top end to the
camcorder. (Charging procedure, pg. 8)
2 Push in the battery pack until it locks into
place.
To remove the battery pack
Slide BATT. RELEASE and pull out the battery
pack.
QUICK OPERATION GUIDE (D.S.C.)
1 Set the System Select Switch to “D.S.C.”.
2 Set the Power Switch to “PLAY”.
— A still image stored in memory appears.
3 Press “W” or “T” of the Page Button to select
the still image you want to view.
(For more details, pg. 53.)
1 Slide the LENS COVER Open/Close Switch
to open the lens cover.
2 Set the System Select Switch to “D.S.C.”.
3 Set the Power Switch to “CAMERA”.
— The power indicator will light and an
image will appear.
4 Press the SNAPSHOT Button.
— A still image is shot and is stored in the
camcorder’s memory.
(For more details, pg. 46)
SUPPLY POWER
PLAYBACK
SHOOTING
Power Switch
Set to “PLAY”
System Select Switch
Set to “D.S.C.”
Page Button
SNAPSHOT Button
Power Switch
Set to “CAMERA”
LENS COVER
Open/Close
Switch
System Select Switch
Set to “D.S.C.”
BATT. RELEASE
Hook on.
Push in.
2
1