Filter
Top Products
EN 19
FEATURE: Quick Review
PURPOSE: To check the end of the last
recording.
OPERATION: 1)Press “ ” and release quickly
during the Record-Standby mode.
Ⅲ Tape is rewound for about 2
seconds and played back
automatically, then pauses in
Record-Standby mode for the
next shot.
NOTE:
Distortion may occur at start of
playback. This is normal.
FEATURE: Retake
PURPOSE: To re-record certain segments.
OPERATION: 1)Make sure the camcorder is in the
Record-Standby mode.
2)Press either RETAKE button to
reach the start point for new
recording. Pressing “F” forwards
the tape and pressing “R” reverses
it.
3)Press Recording Start/Stop Button
to start recording.
NOTE:
Noise may appear during Retake.
This is normal.
FEATURE: 5Sec. Rec (5-sec. Recording)
PURPOSE: To record a scene for 5 seconds,
providing quick scene transitions like
those seen in TV programmes.
OPERATION: 1)During Record-Standby, press
5SEC. REC. “
5S” appears and
5Sec. Rec is reserved.
2)Press Recording Start/Stop Button.
Recording starts, and after
5-second recording is finished, the
camcorder reenters the Record-
Standby mode automatically.
Ⅲ To cancel the 5Sec. Rec.
function, press 5SEC. REC again
so that “ 5S” disappears.
NOTE:
The Fader (
੬
pg. 24) cannot be
activated by pressing 5SEC. REC.
5S
PAUSE
Viewfinder
5SEC. REC
RETAKE (R/F)
5Sec. Rec mode indicator