Filter
Top Products
EN 29
Motor Drive mode:
Keeping the Progressive Button pressed provides an
effect similar to serial photography. (The interval
between the still pictures: approx. 0.7 seconds.)
To Remove The Shutter Sound . . .
.... When you don't want to hear the shutter sound,
set BEEP/TALLY to “OFF” in the system menu
(੬ pg. 35). Though the sound is not heard
from the speaker, it is recorded on the tape.
Colour bar(BAR)***:
When you turn the Progressive Dial to “BAR” and
press START/STOP, the colour bar will be recorded.
This colour bar is useful, when you adjust the
colour or the hue of your monitor during playback.
To stop recording the colour bar, press START/STOP
again and turn the Progressive Dial to “VIDEO” to
start normal recording.
Progressive Mode:
This mode enables recording a jitter-free still image
with superior quality, using the Progressive Scan
CCD (੬ pg. 30).
The Progressive Mode is activated during Pro
Snapshot recordings (except Multi-Analyzer 4 & 9)
and Progressive Video Recording (੬ pg. 44).
A recorded high-resolution still image can be
transferred to a personal computer and processed
using the provided software, or can be printed out
using the optional digital printer GV-DT1.
NOTE:
During playback as well, all Pro Snapshot modes
are available. The shutter sound is not heard.
Pro Snapshot mode
with no frame* ߛ
Pro Snapshot mode
with frame* ߛ
Pin-Up mode ߛ
Multi-Analyzer 4** Multi-Analyzer 9**
* : There is a momentary camera shutter-type blackout together with the sound effect of a shutter
closing, which is recorded together with the image.
** : This will be disabled when P.AE/Effects other than “SHUTTER” are activated.
ߛ : Recorded with Progressive mode.
*** : This is not Pro Snapshot mode. Colour bar will be recorded until Recording stops. (See below)
Colour bar (BAR) ***