Filter
Top Products
EN61
USER MAINTENANCE
After Use
1
Set the Power Switch to “POWER OFF” to turn off
the camcorder.
2
Press OPEN/EJECT in the direction of the arrow then
swing the cover open until it locks. The cassette
holder opens automatically. Remove the cassette.
3
Press “PUSH HERE” to close the cassette cover.
4
Slide BATTERY RELEASE to remove the battery pack.
5
Turn the LENS COVER Open/Close Ring to close
the lens cover.
Cleaning The Camcorder
1
CLEAN EXTERIOR
Wipe gently with a soft cloth.
•Put cloth in diluted mild soap and wring it well to
wipe off heavy dirt. Then wipe again with a dry
cloth.
2
CLEAN LENS
Blow it with a blower brush, then wipe gently with
lens cleaning paper.
3
REMOVE EYEPIECE
Turn the eyepiece counterclockwise and pull it out.
4
CLEAN VIEWFINDER
Remove dust using a blower brush.
5
RE-ATTACH EYEPIECE
Re-attach the eyepiece and turn it clockwise.
NOTES:
●
Avoid using strong cleaning agents such as benzine or
alcohol.
●
Cleaning should be done only after the battery pack has
been removed or other power units have been discon-
nected.
●
Mold may form if the lens is left dirty.
●
When using a cleaner or chemically treated cloth refer
to the cautions of each product.
●
When removing the eyepiece, be sure to hold the
viewfinder securely.
Remove.
OPEN/EJECT
switch
LENS COVER
Open/Close Ring
PUSH HERE
Set to “POWER OFF”.
BATTERY RELEASE