Filter
Top Products
EN59
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
CONTINUED ON NEXT PAGE
24.
During recording, the date/
time does not appear.
25.
The indicators and
messages do not appear on
screen.
26.
The indicators do not
appear.
27.
The viewfinder and the
lens have become dirty
(ex. fingerprints).
28.
The viewfinder indications
blink.
29.
Coloured bright spots
appear all over the
viewfinder.
30.
An unusual mark appears.
24.
•“DISPLAY” is set to “OFF” in
the Date/Time Menu.
25.
•“ON SCREEN” is set to “OFF”
in the Date/Time Menu.
26.
•You have made the indicators
disappear.
27.
————
28.
•Certain Fade/Wipe effects,
certain modes of Programme
AE with special effects,
Picture Stabilizer and other
functions that cannot be used
together are selected at the
same time.
29.
•The viewfinder is made with
high-precision technology.
However, black spots or
bright spots of light (red,
green or blue) may appear
constantly in the viewfinder.
These spots are not recorded
on the tape. This is not due to
any defect of the unit.
(Effective dots: more than
99.99 %)
30.
————
24.
•
Set “DISPLAY” to “ON” in the
Date/Time Menu (
੬
pg. 9).
•
Press DISPLAY for longer
than 1 second to make the
indicators appear (
੬
pg. 15).
25.
•Set “ON SCREEN” to “ON”
in the Date/Time Menu
(
੬ pg. 19).
•
Press DISPLAY for longer
than 1 second to make the
indicators appear (
੬
pg. 15).
26.
•
Press DISPLAY for longer
than 1 second to make the
indicators appear (
੬
pg. 15).
27.
•Wipe them gently with soft
cloth. Wiping strongly can
cause damage.
28.
•Re-read the sections
covering Fade/Wipe effects,
Programme AE with special
effects and Picture Stabilizer
(
੬ pg. 16, 25, 26, 28, 29).
29.
————
30.
•Check the section of the
manual that explains
viewfinder indications
(
੬ pg. 64, 65).