Filter
Top Products
21
TAPE LENGTH
Allows you to set the tape length depending on the
tape used: T30=30 minutes, T45=45 minutes,
T50=50 minutes, T60=60 minutes.
•Tape remaining time
1 is correct only if the
correct tape length has been selected.
DISPLAY
FULL: Makes all of the indications appear on the
LCD monitor/viewfinder during playback or
recording.
SIMPLE: Makes the following indications
disappear from the LCD monitor/viewfinder during
recording or playback:
, tape remaining time,
, tape length (੬ pg. 9, 17).
DATE/TIME DISP.
Makes the date/time appear in the camcorder or on
a connected monitor (set DATE/TIME in SYSTEM
MENU first
੬ pg. 7).
•The selected display will be recorded. If you do
not want to record the display, select OFF before
shooting.
•In the AUTO DATE mode, the camcorder records
the date for about 5 seconds when recording is
initiated after the date is changed, a cassette is
loaded, or AUTO DATE is selected. The date is
replaced after 5 seconds with “AUTO DATE” but
this is not recorded.
OSD OUTPUT
ON: On-screen indications are displayed.
OFF: On-screen indications are turned off except
Date/Time, Instant Title and Warning Indication.
REC TIME
You can shoot a series of pictures, each slightly
different, of the same object for a brief selected
period of time (Animation). REC MODE should be
set to “SP”.
Select the desired recording time and press the
Recording Start/Stop Button
0 after focusing on
the subject.
•Fade- or wipe-in/out cannot be performed.
•This function is cancelled when the power is shut
off or when the cassette is ejected.
•To use this function, it is recommended that
SCROLL in TITLE SETUP (
੬ pg. 18, 19) be set
to “OFF”.
INT. TIME
You can record sequentially at preset time spans.
Leaving the camcorder aimed at a specific subject,
you can record subtle changes over an extended
period of time (Time-Lapse). REC MODE should
be set to “SP”.
(Please note that it is necessary to set the REC
TIME (Animation) in SYSTEM MENU before
performing the INT. TIME (Time-Lapse) function.)
Select the desired interval time and press the
Recording Start/Stop Button
0.
•Fade- or wipe-in/out cannot be performed.
•This function is cancelled when the power is shut
off or when the cassette is ejected.
•To use this function, it is recommended that
SCROLL in TITLE SETUP (
੬ pg. 18, 19) be set
to “OFF”.
TELE MACRO
When set to “ON”, you can shoot a subject as large
as possible at a distance of approx. 60 cm.
Depending on the zoom position, the lens may go
out of focus.
1 GR-SXM195AS_EN_Japan 03.01.24, 9:20 AM21