Filter
Top Products
GETTING STARTED
14 EN
MasterPage: Left
The date/time is recorded onto the tape at all times, but
its display can be turned on or off during playback.
(੬ pg. 29, 33)
1 Set the Power Switch to “M” while pressing down the
Lock Button located on the switch.
2 Open the LCD monitor fully. (੬ pg. 17)
3 Press MENU. The Menu Screen appears.
4 Press r or t to select “n”,
and press SET. The CAMERA
DISPLAY Menu appears.
5 Press r or t to select “CLOCK
ADJ.”, and press SET. The
parameter for “Day” is highlighted.
6 Press r or t to input the day,
and press SET. Repeat to input the
month, year, hour and minute.
7 Press r or t to select
“BRETURN”, and press SET twice.
The Menu Screen closes.
1 Adjust the velcro strip.
2 Pass your right hand through the loop and grasp the
grip.
3 Adjust your thumb and fingers through the grip to
easily operate the Recording Start/Stop Button and
Power Zoom Lever. Be sure to fasten the velcro strip to
your preference.
1 Set the Power Switch to “A” or “M” while pressing
down the Lock Button located on the switch.
2 Make sure the LCD monitor is closed and locked. Pull
out the viewfinder fully and adjust it manually for best
viewability.
3 Turn the Dioptre Adjustment Control until the
indications in the viewfinder are clearly focused.
CAUTION:
When retracting the viewfinder, take care not to pinch your
fingers.
Date/Time Settings
LC
–
NRETUR
T/D
AUMET–/TI DA E OT
OFDEM– CO TI E
F
LA
D
ASERA CM I
YP
V
ON X–MIC AU
NCREON S
I
HTBR G
E
20 OK CL C 21.
J AD .
7
1
. 04
: 30
NRETUR
OK
CL C
J
AD .
LA
D
ASERA CM
I Y
P
21
71
. 04
: 30
20.
Grip Adjustment
Viewfinder Adjustment
PAUSE
Dioptre Adjustment Control
Example:
GR-DZ9_DZ7PAL_04Start.fm Page 14 Monday, May 24, 2004 5:30 PM