JVC LYT1876-001B Camcorder User Manual


 
35
ENGLISH
Connecting the Camera to the
Macintosh
Preparation:
Set the camera’s power/mode switch to OFF.
NOTES
Never disconnect the USB cable while the
access/charge lamp on the camera lights or
blinks.
Do not turn off the camera when the USB
cable is connected, to prevent malfunctions
of the computer.
Connect the camera directly to the
computer, not through a hub.
Do not use an extension USB cable.
When you copy fi les from the computer to
the recording medium on the camera, do not
include any other fi les than those recorded
on the camera.
Do not delete, move, or rename the fi les and
folders in the camera from the computer.
DC Connector
AC Adapter
To AC Outlet
USB Cable
USB Connector
USB Connector
For more details on the operations, double-
click the GUIDEBOOK/PC OPERATION
GUIDE folder in the supplied CD-ROM.
System Requirements
Hardware:
Macintosh 1.25 GHz or faster Power PC
G4/G5 or Intel
®
processor
(Intel
®
Core
TM
Duo 1.66 GHz or more
recommended.)
USB 2.0 connector is required.
OS:
Mac OS X (10.4.4 to 10.4.11, 10.5.1)
RAM:
At least 512 MB
(1 GB or more recommended)
Software Installation
Preparation:
Quit any other software you are using.
1 Load the provided CD-ROM into the
PC.
2 Double-click the CD-ROM icon.
3 Double-click the QuickTime
Component for Everio icon.
4 Install the software following the
procedures shown in the screen.
File Backup on a Macintosh