Filter
Top Products
30
Setup
After the connection is complete, turn on the camera, display an image on the
monitor and check the video image.
In the case of an automatic iris control lens, the camera has been factory-
adjusted to the best position, but it may need to be adjusted according to the
condition of the object or the lens combination. If the image is unnatural, adjust it.
● Also read the instruction manual of the lens.
Ⅵ With a VIDEO automatic iris lens (Automatic iris control lens with
built-in EE amplifier)
Set the switch at the side of the camera to AVIDEOB and adjust the LEVEL dial
on the lens.
Ⅵ With a DC automatic iris lens (Automatic iris control lens without
built-in EE amplifier)
Set the Iris Selector Switch at the side of the camera to ADCB and adjust the
LEVEL with the Iris Level Adjustment Dial at the side of the camera.
Adjusting the lens
DIGITAL
ALCLEVEL
Av Pk
LH
LEVEL adjustment
Do not operate
IRIS
VIDEO
DC
LEVEL
COLORVIDEOCAMERA
IRIS
VIDEO
DC
LEVEL
Iris Level
Adjustment Dial
Iris Selector
Switch
31
ⅷ LEVEL adjustment
Memo:
● If the LEVEL sensitivity adjustment is turned excessively to L, the
sensitivity increases because of the AGC function of the camera and the
image looks grainy.
● Depending on the lens used, if the LEVEL dial is turned excessively to L,
the hunting phenomenon (floppy screen) where the iris opens and closes
involuntarily may occur. In such a case, first set the LEVEL dial to the H
position, and then readjust the LEVEL dial while checking the video signal.
● To adjust the focus accurately, open the lens iris. Below is how to open the
lens iris for automatic iris lens.
● Press the [SELECTOR] switch on the back panel up (J) for 1 second.
[FOCUS ADJUST MODE] is displayed on the monitor screen.
● When the focus adjustment is completed, press either [SELECTOR]
switch (J, K, H, K), [MENU] or [SET] button.
[FOCUS ADJUST MODE] display disappears and the lens iris returns
to original state.
● Connect the monitor TV to the VIDEO OUT terminal on the back panel and
make adjustments.
Monitor screen LEVEL adjustment direction
To darken Anti-clockwise (Towards L)
To brighten Clockwise (Towards H)