JVC TK-T2101RE Security Camera User Manual


  Open as PDF
of 16
 
1
Important Safety Information
Warning and Operating Notes
Installation and serving the camera should be performed only by qualied and
experienced technicians to conform to all local codes and to maintain your warranty.
WARNING! TheuseofCSAcertied/ULListedClass2poweradapters
arerequiredtoensurecompliance.
Note:
This product is intended to be supplied by a Listed Direct Plug-In Power Unit marked
“Class 2” or Listed Adapter marked “L.P.S.” (or “Limited Power Source”) and rated
output DC 12V, 0.415A minimum or AC 24V, 60Hz, 0.415A minimum.
WARNING! Toreducetheriskofreorelectricshock,donotexposethe
producttorainormoisture.
Operating Notes
Power Supply:This dome camera can operate on AC 24V or DC 12V.
Operating Conditions
•
Avoid viewing very bright objects (example, light xtures) for extended periods.
•
Avoid operating or storing the unit in the following locations:
-
Extremely humid, dusty, hot, cold environments (where the operating
temperature is outside the recommended range of 14°F to 122°F [-10°C to
+50°C].)
-
Close to sources of powerful radio or TV transmitters
-
Close to uorescent lamps or objects reecting light
-
Under unstable light sources (may cause ickering)
Note
(for USA)
Note
Connectors and field wiring terminals for external Class 2
circuits provided with marking indicating minimum
of wiring to be used.
Caution
Connect only one camera to the power line, AC24V/DC12V.Do
not share the power line with other equipment. The power
cable between power source and the camera must be under 3 m.
Connect only one camera to the power line, AC24V/DC12V.
Do not share the power line with other equipment. The
power cable between power source and the camera must
be under 3 m.
Class
Class 2 shall be marked adjacent to
the field wiring terminals
.
 previous next