JVC UGZ-HM400 Camcorder User Manual


 
21
EN
Zooming
Preparation:
Select ! or # mode.
Select the recording mode.
Zoom in Zoom out
T: Telephoto W: Wide angle
You can also zoom out/zoom in by selecting [W] or
[T] on the LCD monitor. (On-screen zoom control)
Zoom ratio (factory-preset)
! mode # mode
[10X/OPTICAL] [10X/OPTICAL]
To change the maximum zoom ratio
(! mode only)
Change the settings in [ZOOM].
NOTE
Macro shooting is possible as close as approx.
5 cm (2") to the subject when the zoom lever is
set all the way to W.
Flash
Preparation:
Select # mode.
Select the recording mode.
1 Touch MENU.
2 Select [FLASH].
3 Select the desired setting.
1 OFF
Disables this function.
AUTO
The flash fires automatically.
AUTO
RED-EYE
The flash fires automatically
but reduces the red-eye
phenomenon of the subject’s
eyes.
( ON
The flash fires regardless of the
shooting condition.
SLOW
SYNCHRO
The flash fires. The shutter
speed becomes slower, so
that background can also be
brightened.
NOTE
The flash does not work during [CONTINUOUS
SHOOTING] and [BRACKETING].
The flash does not work with the following
SCENE SELECT settings.
[LANDSCAPE] [TWILIGHT] [NIGHT] [SNOW]
[BEACH] [FIREWORKS] [SUNSET]
It is recommended shoot distance within 2 m
(6.6 ft).
Checking the Remaining Space on
the Recording Media
Preparation:
Select ! mode.
Select the recording mode.
Press INFO.
The maximum recording time is displayed for
each video quality mode.
To change the video quality
1) Select the video quality.
2) Select [SET].
To quit the screen
Select [QUIT].
Checking the Remaining Battery
Power
! mode:
Press INFO and then select
;
.
# mode:
Press INFO.
To quit the screen
Select [QUIT] or press INFO.
NOTE
The recordable time display should only be used
as a guide. It is displayed in 10 minute units.
Selected recording medium only
RECORDING/PLAYBACK