JVC VN-V26U Security Camera User Manual


 
Timing of Data Sending
512 bytes, or in other words, 64 msec of audio data may be sent during each transmission. Send audio data at
intervals as evenly as possible. A part of the data may be lost if audio data exceeding 2 seconds are sent to VN-V26 at
one time.
9. List of Protocols and Port Numbers Used with VN-V25/26
VN-V25/26 uses the following protocols and port numbers.
Protocol / Port Number Use
TCP 20, 21 FTP
TCP 25 SMTP (Mail by Alarm Action)
TCP 80 WEB setting page, API for Getting status and changing
settings, acquisition of JPEG/MPEG-4 from VN-V25/26 by
client, acquisition audio from VN-V26 by client
UDP 80 Search for VN-V25/26
TCP 110 POP (Mail by Alarm Action)
UDP 123 SNTP
TCP 10020, 10021, 10023 reserved for internal use
TCP 32040 Alarm server
TCP 49298 Audio sending from a client to VN-V26
TCP User Setting Alarm on TCP
UDP User Setting Alarm on UDP
UDP User Setting Multicast Streaming
10. Customizing VN-V25/26's Built-in Viewer
The built-in JPEG/MPEG-4 viewer of VN-V25/26 consists of an ActiveX control. The ActiveX is available for
customized viewer.
10.1. Properties of ActiveX
- RcvMode 0 for TCP, 1 for multicast
- IP IP Address of VN-V25/26 in case of TCP
- HttpPort Port Number of VN-V25/26 in case of TCP
- MultiIP IP Address of multicast
- MultiPort Port Number of multicast
- DispWidth Width of Display
- DispHeight Height of Display
- FrameRate Frame Rate of JPEG (MPEG-4 viewer does not have this property.)
77