JVC VN-X35U Digital Camera User Manual


  Open as PDF
of 2
 
IP address setting at the computer
Set the computer to an IP address that enables communication with VN-X35U. (Procedures described in
this item are intended for Windows XP users.)
1 Click [Start]
● Select in the sequence of [Control Panel]-[Network Connection]-[Local Area].
● Windows Vista :
Select in the sequence of [Settings]-[Control Panel]-[Network and Sharing Center]-[Manage network
connections].
2 The computer on which Internet Explorer is launched automatically selects the
connected network
● Right-click and select [Properties].
● Check to ensure that the [Client for Microsoft Networks] and [Internet Protocol(TCP/IP)] check boxes
are selected.
● Windows Vista Check to ensure that the [Microsoft Network Client] and [Internet Protocol Version 4
(TCP/IPv4)] checkboxes are selected.
3 Select [Internet Protocol(TCP/IP)] and click [Properties]
Windows Vista Select [Internet Protocol Version 4 (TCP/IPv4)], and click [Properties]
4 Set the IP address
A Select [Use the following IP address].
B Specify the [IP address]. (For example, use 192.168.0.100 when VN-X35U is in its default settings
and there is no DHCP server)
Memo
● Make sure that you take note of the original IP address before altering.
● Ensure that a duplicate IP address is not specified within the same network environment.
C Set [Subnet Mask] to a value that is appropriate for the setting operation. Consult the network
administrator if you have any queries.
(Use 255.255.255.0 when VN-X35U is in its default settings and there is no DHCP server)
D When a [Default Gateway] is present, make use of the corresponding IP address (e.g.,
192.168.0.254).
E Click [OK].
5 Click [OK] on the ALocal Area Connection PropertiesB screen
Changing the IP address using the Internet Explorer
1 Launch the Internet Explorer on the computer
2 When proxy settings are enabled in the Internet Explorer, follow the steps below to
disable the proxy of the Internet Explorer
● Select in the order of [Tool]-[Internet Options]-[Connections]-[LAN Setting], followed by deselecting
the check for [Use a proxy server for your LAN] under [Proxy Server] of the [Local Area Network
(LAN) Settings] window.
3 If the active script of the Internet Explorer is disabled, follow the steps below to enable
it
● Select [Trusted sites] under [Tool]-[Internet Options]-[Security]. Upon doing so, the [Sites...] button
directly below becomes active. Click this button and deselect the check in the displayed window, and
add the IP address of the camera. to the zone. When VN-X35U is in its default settings and there is
no DHCP server, add the following URL.
http://192.168.0.2
● Next, select [Trusted sites] under [Tool]-[Internet Options]-[Security], and press the [Custom Level]
button. Select [Enable] under [Scripting]-[Alarm] of the [Security Settings] window that has been
opened.
4 Launch the Internet Explorer
A
Enter IP address of the camera into the address field. (Example : http://192.168.0.2)
B Click [Go].
Memo
● If the proxy server settings for access to the Internet via the Internet Explorer is enabled, you may not be
able to specify the IP address directly. In this case, change the proxy settings of the Internet Explorer.
● After the [Security Settings] screen appears, press the [OK] button to proceed.
5 Enter the user name and password (login as administrator)
A
Enter the user name. This is set to AadminB by default.
B Enter the password. This is set to AjvcB by default.
C Click [OK].
6 Built-in Viewer of VN-X35 is displayed and the operator password entry screen
appears
A
Enter the password of operator. This is set to AjvcB by default.
B Click [OK].
7 Click [Details] of the VN-X35 Built-in Viewer
8 The [Basic Settings 1] screen appears
A
Set the [IP Setting] item to [DHCP Disable]. Enter the values you wish to specify in the [IP Address],
[Subnet Mask] and [Default Gateway] fields.
B Select the [Time Zone].
C Click [OK].
Memo
● To open [Basic Settings 1] page directly, enter URL below to Internet Explorer.
Example: http://192.168.0.2/cgi-bin/x35display.cgi?x35basicmenu1.html
9 A confirmation screen appears. Press the [OK] button
● VN-X35U restarts using the new IP address. It takes about one minute for the camera to reboot.
Memo
● Access from this computer may fail when the IP address of VN-X35U is changed. To enable access to
VN-X35U from the same computer, alter the IP address at the computer accordingly.
K
Configuring settings using the Internet Explorer
K
Operating Built-in Viewer
Supply voltage
AC 24 V 50 Hz/60 Hz or PoE (DC -48 V)
Current consumption AC 24 V 0.35 A, PoE 135 mA (6.5 W)
Mass 510g (1.17 lbs)
Dimension [Unit: mm (inch)] 66 (2-5/8) 63 (2-1/2) 126 (5)
T Specifications and appearance of this product are subject to changes for improvement without prior
notice.
IP Address Settings
A
B
C
D
E
Deselect the check
Ⅵ When the IP address of VN-X35U is unknown
IP address settings cannot be changed by accessing via a computer when the IP address of VN-X35U is
unknown. In this case, you can obtain information on the IP address using the following method.
● ASearch toolB is available in the ATOOL_EB folder in the attached CD-ROM. You can use this tool to
search for information on VN-X35U within the LAN.
T For details on the ASearch toolB, please refer to the AREADMEB file in the ATOOL_EB folder.
Select [Enable]
A
B
A
B
VN-X35
C
A
B
When the display or configuration of the opened screen appears strange, check using the
following procedures.
A Click [Start]-[Control Panel]-[Display] and open the [Display Properties] window
B
Click the [Settings] tab in the [Display Properties] window and click the [Advanced] button
C
Check that [DPI setting] in the [General] tab has become [Normal size(96DPI)]
D
Otherwise, change the setting to [Normal size(96DPI)] and reboot Windows
Configure the picture quality and alarm settings using the Internet Explorer.
T For details, please refer to the instruction manual (pdf) in the CD-ROM.
Built-in Viewer enables you to monitor JPEG or MPEG4 images, send/receive audio data, perform PTZ
operations, and register preset positions.
T For details, please refer to the instruction manual (pdf) in the CD-ROM.
Click
A
B
C
Specifications
LST0744-001A
©
2008 Victor Company of Japan, Limited
VN-X35_Readme_JP.book Page 2 Monday, September 8, 2008 9:41 AM
 previous