Filter
Top Products
KODAK AEROCHROME III MS Film 2427 • AS-2569 3
Processing Sequence—3.5 fpm
*
Inject EA-5 Stabilizer and Replenisher into tank 16 of the final wash at a
rate of 50 mL/min for all film widths.
*
Inject EA-5 Stabilizer and Replenisher into tank 18 of the final wash at a
rate of 50 mL/min for all film widths.
†
Set air damper control knobs at 8. The temperature of the dryer may
require adjustment depending on the ambient temperature and humidity
conditions in the processing area.
KODAK Aerial Color Processor, Model 1611
Solution/
Step
Tank
No.
Time
(Seconds)
Solution Temperature
SKIP
TA NK S
1, 2, 3 21.3 —
First
Developer
4, 5 141.6 (49.4 ± 0.3°C) 121 ± 0.5°F
First Stop 6 70.5 (46 ± 3°C) 115 ± 5°F
Wash 7 71.3 (49 ± 3°C) 120 ± 5°F
Color
Developer
8, 9 140.7 (49 ± 0.6°C) 120 ± 1°F
Second
Stop
10 71.1 (49 ± 3°C) 120 ± 5°F
Wash 11 70.5 (49 ± 3°C) 120 ± 5°F
Bleach 12 70.3 (49 ± 3°C) 120 ± 5°F
Fixer 13 71.3 (49 ± 3°C) 120 ± 5°F
Final Wash
*
14, 15,
16
211.3 (49 ± 3°C) 120 ± 5°F
Dryer — 106.5 (63 ± 3°C) 145 ± 5°
KODAK EKTACHROME RT Processor, Model 1811,
Quick-Change
Solution/
Step
Tank
No.
Time
(Seconds)
Solution Temperature
SKIP
TA NK S
1 - 6 39.3 —
First
Developer
7, 8 141.3 (49.4 ± 0.3°C) 121 ± 0.5°F
First Stop 9 70.3 (46 ± 3°C) 115 ± 5°F
Wash 10 71.3 (49 ± 3°C 120 ± 5°F)
Color
Developer
11, 12 140.7 (49 ± 0.6°C) 120 ± 1°F
Second
Stop
13 70.3 (49 ± 3°C) 120 ± 5°F
Wash 14 71.3 (49 ± 3°C) 120 ± 5°F
Bleach 15 70.5 (49 ± 3°C) 120 ± 5°F
Fixer 16 71.1 (49 ± 3°C) 120 ± 5°F
Final Wash
*
17, 18 140.7 (49 ± 3°C) 120 ± 5°F
Dryer
†
— 147.3 (60 ± 3°C) 140 ± 5°F
Replenishment and Wash Rates—3.5 fpm
*
These rates have been rounded to the nearest usable increment.
†
Inject EA-5 Stabilizer and Replenisher into tank 16 (Model 1611) or tank
18 (Model 1811) of the final wash at a rate of 50 mL/min for all film
widths. In the Model 1611, this was flows countercurrent to tanks 15 and
14. In the Model 1811, this wash overflows from tank 17 into tank 14.
Processing Sequence—5.3 fpm
*
No temperature controlling device is provided; solution temperature
attains “equilibrium” depending on temperature of replenisher and
surrounding conditions.
†
Set air damper control knob at 8. The dryer temperature may require
adjustment depending on the ambient temperature and humidity
conditions in the processing area.
Models 1611 and 1811 with Quick-Change
*
Solution/
Step
Basic
Rate
(mL/sq ft)
Film Width
70 mm
(mL/min)
5-in
(mL/min)
9 1/2-in
(mL/min)
First
Developer
150 120 220 415
First Stop 200 160 290 555
Wash —2 gal/min—
Color
Developer
250 200 365 695
Second
Stop
200 160 290 555
Wash —2 gal/min (Model 1611 only)—
Bleach 90 75 130 250
Fixer 100 80 145 275
Final
Wash
†
—2 gal/min—
KODAK EKTACHROME RT Processor, Model 1811
Solution/
Step
Tank
No.
Time
(Seconds)
Solution Temperature
SKIP
TANKS
1, 2, 3 14.6 —
First
Developer
4, 5, 6 140.3 (49.4 ± 0.3°C) 121 ± 0.5°F
First Stop 7 46.9 (46 ± 3°C) 115 ± 5°F
Wash 8 46.9 (49 ± 3°C) 120 ± 5°F
Color
Developer
9, 10,
11, 12
187.5 (49 ± 0.6°C) 120 ± 1°F
Second
Stop
13 46.9 (49 ± 3°C) 120 ± 5°F
Wash 14 46.9 (49 ± 3°C) 120 ± 5°F
Bleach 15 46.9 (49 ± 3°C) 120 ± 5°F
Fixer 16 46.9 (49 ± 3°C) 120 ± 5°F
Wash 17 46.9 (49 ± 3°C) 120 ± 5°F
Stabilizer 18 46.9 —Equilibrium—
*
Dryer
(Vents set
at 8)
†
— 97.8 (60 ± 3°C) 140 ± 5°F