Filter
Top Products
Using Kodak EasyShare Cameras
Josh Burker | josh_burker@misd.wednet.edu
October 2005
The Kodak EasyShare DX6340 is a digital still camera. These instructions will walk you through
the basics of using the camera.
Begin by turning on the camera. You move the mode dial clockwise to the Auto position to turn
on the camera.
The Ready light will blink green as the camera warms up and performs diagnostic checks.
When the Ready light glows solid green the camera is ready to take photos.
The back of the camera includes an LCD display that you can use while you take your
photographs. To turn on the display press the OK button in the middle of the mode dial, pictured
above. Note that using the display will reduce the battery life of the camera.
In order to fit the maximum number of photographs in the camera’s memory it is advisable that
you take your photos in Good or Better quality. Picture quality is configured from the camera’s
menu. Make sure the camera is powered on. Press the Menu button on the camera to show the
picture quality setting.
Press the button to highlight Quality then press the OK button in the middle of the
mode dial. Highlight either Good or Better picture quality settings. Press the OK button in the
middle of the mode dial to exit the menu. The picture quality setting will remain the same until it
is changed.
Once you have set the picture quality you are ready to start taking your photographs.