Filter
Top Products
28 29
Panorama mode
Panorama Mode allows you to create a panoramic picture. The
camera will automatically compose a panoramic picture using
the individual shots that you take.
Follow these steps to create a panoramic picture:
1. Turn the mode dial to the Panorama Mode. Then enter
the Photo Setup to Select either Auto Stitching or Manual
Stitching (Please refer to Page 37 to enter the Still Picture
Menu.)
2. Use the Left/Right buttons to specify the direction of
picture taking, and then in 2 seconds the panoramic
sequence will commence automatically.
3. Compose the rst view of the panoramic picture on the
LCD screen and press the Shutter button to capture.
4. After the rst shot is taken, the semi-transparent image of
the rst shot will appear at the edge of the screen. You can
use this image to compose your picture before you press
the Shutter button to capture and nish manual stitching.
5. The camera will then stitch the pictures into a panorama
automatically.
6. Press the
button to enter Playback mode and review
the panorama result.
After taking a Panoramic picture press the func/ok but-
ton to save and exit or press the Delete button to cancel
and exit.
Flash Mode, Self-timer, Macro Mode, and Exposure Com-
pensation are disabled on Panorama Mode.
Pictures cannot be deleted, nor the zoom adjusted until
the series is nalized.
Panorama Mode can stitch 2 or 3 maximum pictures.