Konica Minolta 109678 Photo Printer User Manual


 
The monitor image can be made lighter or darker. The
brightness level can be set individually for viewfinder and
direct viewing. Turn the mode switch to the appropriate
position. Press and hold the information (i
+
) button to open
the LCD brightness screen.
Use the left/right keys of the controller to adjust the
brightness; the monitor image changes accordingly.
Press the center of the controller to set the brightness
level or press the menu button to close the screen
without applying any changes.
28 Basic recording
Pressing the information (i
+
) button changes the monitor display. The display cycles among the stan-
dard display, real-time histogram, and live image only.
Standard display Live image only
Information button
i
+
button
Adjusting monitor brightness
Set LCD brightness
:adjust
:enter
Low High
The real-time histogram shows the approximate luminance
distribution of the live image. This histogram cannot show
the affect of flash illumination. The histogram of a recorded
image may not show the same distribution as the real-time
histogram.
Real-time histogram