Konica Minolta S404 Digital Camera User Manual


 
34
AUTO-RECORDING MODE
REMOTE CONTROL (SOLD SEPARATELY)
The IR Remote Control RC-3 allows remote camera operation up to 5m
(16 ft.) away. The remote control unit can be used in movie recording (p.
65).
Place the camera on a tripod, and set the drive
mode to self-timer / remote control
(p. 32).
Arrange the camera and subject to compose the
picture. Frame the subject within the focus frame
when setting up the camera.
Focus lock cannot be used with the IR remote
control.
In multi-function recording mode, focus area
selection can be used for off-center subjects (p. 48).
While pointing the emitter window of the remote
control unit toward the camera, press the release
button or the delay button to take the picture.
When the release button is pressed, the self-timer
lamp on the front of the camera will blink once before
the picture is taken.
When the delay button is pressed, the self-timer
lamp on the front of the camera will blink for two
seconds before the picture is taken.
The remote control may not operate with backlit
subjects or under fluorescent light.
Emitter window
Delay button
Release button