Filter
Top Products
User’s Manual >>
E-29
PHOTOGRAPHY MODE
[ ] Still Image Mode
Auto photography is a typical method of photography. Photographs can be
taken simply because the exposure (the combination of shutter speed and
aperture setting) is controlled automatically to suit the photographic conditions.
You can use the 2.5" LCD monitor to compose the images.
Make sure that the battery and SD card are inserted before taking photographs.
1. Press the ON/OFF button to turn the power
on.
2. Slide the mode switch to [ ].
By default, the LCD monitor setting is on.
3. Compose your image in the LCD monitor.
4. Press the shutter button.
Pressing the shutter button down
halfway automatically focuses and
adjusts the exposure, and pressing the
shutter button down fully takes the
photographs.
The focus area frame turns blue and the
status LED lights green when the camera
is in focus and the exposure is calculated.
When the focus or exposure is not
suitable, the frame of the focus area
turns yellow and the status LED flashes
red.
If the photographic preview is set to “ON”, the preview image (captured
image) will be displayed while the image is being recorded onto the SD
card.
1
Press down halfway
2
Press down fully