Filter
Top Products
10 11
For evaluation of high-class next-
generation lamps such as LED
illumination and EL illumination
Data Management Software CL-S10w (Standard accessory)
Main Features
Convenient, easy-to-use Excel
®
add-in software
Reads measurement data from the CL-500A directly into
Excel
®
. Further processing of data can then be performed
easily using the various functions of Excel
®
.
Multi-point measurement possible using
multiple CL-500A units
Data Management Software CL-S10w can be used to control
up to 10 CL-500A units for multi-point measurements. Using
the SDK, this can be further expanded. Please contact our
sales person for further information.
Spectral irradiance waveform display
Since peak wavelengths can be seen easily, classication
and grading of light sources can be performed easily at high
accuracy. In addition, numerical data at 1 nm can also be
viewed in list form.
0.00E+00
5.00E-02
1.00E-01
1.50E-01
2.00E-01
2.50E-01
3.00E-01
3.50E-01
4.00E-01
4.50E-01
5.00E-01
410nm 460nm 510nm 560nm 610nm 660nm 710nm360nm 760nm
Informative color-rendering index display
Color-rendering indexes are shown visually for easy
understanding. The shifts between a test light source and a
standard light source can be seen at a glance, with bar
graphs showing the general color-rendering index Ra (the
average of special color-rendering indexes R1 to R8) and
the special color-rendering indexes for a total of 15 colors (R1
to R15).
Equipped with LED binning function
In addition to quantifying the color variations which are a
major problem in the LED industry, the software is also
equipped with function to enable easy binning.
0.2000
0.2500
0.3000
0.3500
0.4000
0.4500
0.5000
0.2000 0.2500 0.3000 0.3500 0.4000 0.4500 0.5000
Dominant
wavelength
Black body
locus
2700K
3000K
3500K
4000K
4500K
5000K
5700K
6500K
xy
0 20 40 60 80 100
Ra
R1
R2
R3
R4
R5
R6
R7
R8
R9
R10
R11
R12
R13
R14
R15
0
100
R1
R2
R3
R4
R5
R6
R7
R8R9
R10
R11
R12
R13
R14
R15
Compact, lightweight, handheld
The CL-500A weighs only 350 g, making it easy to take
along or to hold in your hand for measurements.
All-in-one type.
No PC needed.
The CL-500A can be used by itself for measuring CRI or color
temperature of lamps. In addition, the spectral irradiance
waveform and peak wavelength can also be checked.
High-speed measurement possible
Using the SDK, high-speed measurements at 5 times/sec.
can be taken.
Ø10.5 mm receptor size
Can be operated with USB bus power.
Handheld illuminance spectrophotometer
conforms to both DIN and JIS standards.
The CL-500A conforms to DIN 5032 Part 7 Class B
and JIS C 1609-1:2006 General Class AA, making it
the rst compact, lightweight, handheld illuminance
spectrophotometer to conform to both DIN and JIS
standards.
Can be easily mounted on inspection jigs, etc.
The CL-500A is equipped with standard tripod sockets on
both the top and bottom surface, so it can be easily mounted
on a jig facing either downwards or upwards. In addition,
the SDK for the CL-500A can be downloaded free of
charge from the Konica Minolta website, making it easy for
customers to create their own software.
The CL-500A can be a sensor for systems that use an
integrating sphere for total ux measurements of light
sources and lamps.
Illuminance Spectrophotometer
CL-500A
illuminance Measurement Trio
0 20 40 60 80 100
Ra
R1
R2
R3
R4
R5
R6
R7
R8
R9
R10
R11
R12
R13
R14
R15
Illuminance Spectrophotometer CL-500A Illuminance Spectrophotometer CL-500A