Filter
Top Products
1) Press the AE release button (24) and turn the
aperture ring (7) to set the aperture manually.
*A red warning mark will appear m the finder to
show that the camera is set for manual aperture
control.
2) Correct exposure can be obtained by turning the
aperture ring or shutter speed dial (3), while looking
through the finder, until the meter needle points to
the stopped-down metering mark inside the finder.
'Pictures may be underexposed when the needle is
above the index mark, and overexposed when the
needle is below it.
4.butkus.org
*Exposure measurement in stopped down mode
may be affected by light coming in through the
camera eyepiece. It is a good idea to use an eye cup.
*Make sure the meter is exactly aligned with the
stopped-down metering mark
Light Metering at Full Lens Opening:
Manual picture-taking may be carried out
even with the Hexanon AR lens, Read the
aperture value shown by the needle of the
meter and set the manual aperture scale (19)
according to the aperture value.