Filter
Top Products
10
QUICK START MENU
When you initially push the POWER button, the unit is ready for scanning. To
enter the Quick Set Menu
TM
, press and hold the MODE button for at least 1
second.
To manipulate a function, press the MODE button until that function is
displayed, then use the POWER button to change the setting. If this is the last
function to be changed, you can allow the rangefinder to sit idle for 20 seconds
which will cause an automatic power-off, saving all selections. If additional
functions require manipulation, simply press MODE to continue through the
Quick Set Menu. Pressing and holding MODE for 1 second at any time will
save all changes, exit the Quick Set Menu, and prepare the rangefinder for
immediate use.
Note: Activating certain modes automatically disables other modes. For example
activating the yards mode will automatically deactivate the meters mode.