Troubleshooting
12
Troubleshooting
If you have problems with your System, there is often a quick and simple solution. Please try the
following:
Problem Solution
There is no picture from a
Camera.
• Check all connections to the Camera. Make sure
the adaptor is plugged in.
• Make sure that the Cameras and Receiver are
both ON.
• Make sure that the receiver is set to search for the
Camera (using the DIP Switch settings).
• Make sure that the camera is in range of the
Receiver.
• If using the battery adaptor, try replacing the 9V
Battery
There is Interference with
the Camera Picture.
• Make sure that each camera (transmitter) is within
range, and that there are no large obstructions or
interference (i.e. older cordless phones on the
900MHz Frequency).
• Try repositioning the camera, receiver or both to
improve the reception.
There are problems with
the Audio.
• Ensure that the volume on the TV is ON
• Make sure that the sound is occurring within
range of the Camera Microphone
• If the unit emits a loud screeching noise
(feedback), move the camera or receiver farther
apart.