Filter
Top Products
It’s all on the Web
For detailed setup information, please
refer to your User’s Manual. For additional
information, please visit our website
www.lorexcctv.com/support
www.lorexcctv.com
Skill Level
Intermediate
easy
advanced
Time
under 30 minutesunder 15 minutes under 60 minutes
Hand Tools Hardware
Router
Hi Speed
over 60 minutes
Skill Level
Intermediate
easy
advanced
Time
under 30 minutesunder 15 minutes under 60 minutes
Hand Tools Hardware
Router
Hi Speed
over 60 minutes
Time Tools Skills - Easy
Under 20 Minutes*
Hand Tools
Plug & Play connectors, On
screen set up
* Installation time may vary based
on application and camera cabling
SHS-4QM SERIES Quick Set-Up Guide R1
www.lorexcctv.com
C: Access the Event Setup Menu
• Use the arrow keys to navigate
• Press ENTER to turn on ALARM EVENT
REPORTING for each camera detecting
Motion.
• Press ENTER to turn on MOTION EVENT
REPORTING for each camera detecting
Motion.
• When Motion is detected, the SHS
system will switch to the Camera, and an
audible alarm will sound.
Event Setup
Menu Set-up
A: Access the Menu System
• Press the MENU button for 3 seconds to
enter Menu Mode.
• Press the buttons to navigate
within the Menu and choose the desired
selection.
• Press the ENTER button to accept the
selection.
• Press the MENU button to Exit the Menu
Setup.
Full Function Remote Control with Multiple Viewing Modes
• Use the arrows to move between
cameras.
• Use the arrows to move between
Menu Settings.
• Set the Motion Detection Time as
desired (Always ON, OFF or for a
specific timeframe).
• Set the Sensitivity (amount of motion
needed to trigger an alarm) and the
Velocity (speed of motion needed to
trigger an alarm).
• Set the Masking Area:
· Use the arrow keys to navigate
through grid.
· Press the ENTER button to select or
deselect a square on the grid.
· Areas set to detect motion are not
shaded. Masked areas in blue do not
detect motion.
· Each area (grid square) must be
selected individually.
• Press the MENU button to Exit. All
settings will be saved.
Motion Setup
B: Enter the Motion Setup Menu
PIP
Dual PIP
Split
Quad
Freeze
Zoom
SHS-4QM SERIES
QUICK SET-UP GUIDE
STEP 2
MENU, MOTION SENSING
& EVENT SET-UP